New V6...won't connect

Cretins

New member
Preloaded latest version IOS FIFISH app on iPhone SE. Charged and powered up V6, everything seems to be ok except the FIFISH app won't connect?? Anybody know what's going on?
 

Flatfish

New member
I am new to my V6 and also struggled with this issue. So I followed the directions and connected to the ROV after I made the connection to the WiFi

Disregard the above .
I just tried to duplicate the connection issue and the final result is it connected the iPad with the RC's WiFi and the ROV no matter if I plugged in the ROV after the RC made connection or had them all plugged together before I made the WiFi connection.

Having said that my first connection attempted today also failed . Going back to the network connection and turning the RC off and starting over made it work.
 
Last edited:

Kristafer John

New member
I just got the V6 as well and have the same issue.. its hard to get the connection to start... also kept having connection disconnects of the video .. Can the controller and the remote be hardware connect.. or has to be wifi only ?
 

Bluesky Lee

New member
Preloaded latest version IOS FIFISH app on iPhone SE. Charged and powered up V6, everything seems to be ok except the FIFISH app won't connect?? Anybody know what's going on?
다음과 같이 시스템을 점검해보세요..
(저의 답글은 구글번역기로 번역하세요!)
1. App을 실행시키면 첫 화면에
'도움' 항목을 누르고, 하위 항목의 ' 기기점검"을
눌러서(클릭해서) 6가지의 점검을 실행하세요!!
( 6축,3축, LED, 카메라, etc ....~~~)
=> ok...or fail 결과를 살펴보세요...
만약에 카메라 점검이 실패했을때... , App(어플리케이션)가 제대로 실행되지 않는 현상이 나타나게
됩니다. ( 펌웨어 업게이트가 안되는 문제, app 화면이 조정자(카메라 화면) 모드로 전환되지 않는 현상, 기타 몇가지 문제 현상들....

2. Wifi와 데이터통신(4g or 5g)가 동시에 흐마트폰에서 실행이 되는지 확인하십시요. 덤으로
Wifi 목록에서 리모컨에서 송신되는 wifi가 스마트폰의 wifi 목록에서 보여지는지 확인 하십시요.
==> <FIFISHRC_xxxx 인터넷에 연결할 수 없습니다)>...라고 wifi가 나타나는지 확인하십시요..

3. 그리고 app를 실행시키세요.
=> '연결' 버튼을 클릭하면 '연결" 실행이 되고, 조정자모드(카메라화면)로 전환이 되는지 확인 하세요. 만약에 전환이 되지 않는디면 rov 본체..즉 하드웨어적인 문제나 고장일수도 있습니다.

4. 주위 지인 혹은 가족들의 다른 스마트폰 기종으로 app를 set 후에 rov를 정상적으로 컨트롤 할 수 있는지 시도해 보세요..(꼭 당신의 그 아이폰으로만 시도하려고 하지말고!)
Preloaded latest version IOS FIFISH app on iPhone SE. Charged and powered up V6, everything seems to be ok except the FIFISH app won't connect?? Anybody know what's going on?
 

Flatfish

New member
Translated with Google Translate from Bluesky Lee's post

Check your system as follows.
(Translate my reply with Google Translate!)
1. When you run the app, the first screen appears
Press the 'Help' item, and click the 'Device Check' in the sub-item.
Click (click) to run 6 checks!!
( 6-axis, 3-axis, LED, camera, etc ....~~~)
=> Look at the ok...or fail result...
If the camera check fails...
It's possible. (Firmware upgrade fails, the app screen does not switch to the moderator (camera screen) mode, and some other issues...

2. Check if Wifi and data communication (4g or 5g) are running on the smartphone at the same time. as a bonus
In the Wifi list, check if the wifi transmitted from the remote control is shown in the wifi list of the smartphone.
==> <FIFISHRC_xxxx cannot connect to the internet)>...

3. And run the app.
=> If you click the 'Connect' button, 'Connect' is executed and check if the mode is converted to the moderator (camera screen). If the conversion does not work, the rov body.. that is, it may be a hardware problem or malfunction.

4. After setting the app with other smartphone models of your acquaintances or family members, try to see if you can control the rov normally. (Don't just try it with your iPhone!)
 

Flatfish

New member
What does this message mean on my fifish v6 under Version Function? My iPad is connected to the RC, all functions under Device Check check good and the camera works.
Click where to refresh?????

Bluesky Lee
버전 기능에서 내 물고기 v6에서 이 메시지는 무엇을 의미합니까? 내 iPad가 RC에 연결되어 있고 장치 확인 아래의 모든 기능이 정상이고 카메라가 작동합니다.

새로고침할 위치를 클릭하시겠습니까?
beojeon gineung-eseo nae mulgogi v6eseo i mesijineun mueos-eul uimihabnikka? nae iPadga RCe yeongyeoldoeeo issgo jangchi hwag-in alaeui modeun gineung-i jeongsang-igo kamelaga jagdonghabnida.

saelogochimhal wichileul keullighasigessseubnikka?


?
Network.JPEG
 
Last edited:

Flatfish

New member
It's hard to find answers.
The screen shot above is from the fifish app on my iPad under the "HELP" menu while connected to the RC, it askes for the iPad to be connected to the internet. It now requires the iPad to be disconnect from the RC WIFI and connect to the internet WIFI this will provide the content of "VERSION FUNCTION" (the version of Firmware ) and also "FIRMWARE UPDATE" if a new version is available and more.
Next step is to reconnect to the RC's WIFI to operate the RC.
I don't know of a way to keep both connections to the internet and the RC at the same time???
Maybe some one can tell me.

Cretins' are you getting Connected any easier ? I know you can't do a "MACHINE SELF CHECK" until the RC connection is established .
Kristafer, there doesn't seam to be a way to hard connect
 
Last edited:

Zhenya88

New member
1+.png

USB-LAN
I identified the contacts for the DIY adapter.
Connect to PC or Smartphone/tv-box without WiFi 5G.
Снимок экрана 2022-07-17 161124.png

rtsp://192.168.2.160/livestream/12 - video stream witch VLC player or MediaPleerClassic
 
Last edited:

Flatfish

New member
Thanks great info.
Also I was wondering if the automatic WIFI setting verses the Manual WIFI connection makes any difference in reliability of getting connected?
By the way I don't have a issue with my WIFI connection anymore. It just takes a little while for the remote control WIFI to show in the phone's network .


This also may be of help to determine if the tether cable is functioning correctly by doing a continuity test on the cable.
Fifish Tether Pinout.jpg
 
Last edited:

Flatfish

New member
Kristafer
From Fifish customer service:
https://store.qysea.com/lightning-to-ethernet-adapter.html
I will order it and try it.
View attachment 961
Just received an update to my order "lightning to Ethernet adapter " I was informed that they didn't add the shipping cost $59.- to the $29.- order. I probably will cancel the order since my WIFI connection works and the shipping form China will probably take a long time.
I also think with the pinout ZHENYA88 posted we could make our own from standard parts.
 

Zhenya88

New member
Thanks great info.
Also I was wondering if the automatic WIFI setting verses the Manual WIFI connection makes any difference in reliability of getting connected?
By the way I don't have a issue with my WIFI connection anymore. It just takes a little while for the remote control WIFI to show in the phone's network .


This also may be of help to determine if the tether cable is functioning correctly by doing a continuity test on the cable.
View attachment 965
Cable plug my fifish v6:
Screenshot_2022-07-25-17-03-13-74_6f8f7a6a69f2aa2976412416ecb84f7a.jpg
 

liber

New member
Me.pasa lo.mismo... conecto fifish a emisora y la emisora hace el giro de luces no detecta el rov.. y estoy conectado vía WiFi a la emisora
 
Top